LOOMI UV-LED Sol Lamp

Professional UV/LED Nail Lamp

Technical Specifications:

Equipped with 48 precisely positioned LED diodes, the lamp provides even and fast curing of all types of light-curing materials, regardless of their formula. The lamp features four timer modes: 10, 30, and 60 seconds, as well as a special Low Heat Mode – 90 seconds, which gradually increases light intensity.

This is an ideal solution for clients who are sensitive to the burning sensation during curing. The timer is placed in a strategic position, allowing the nail technician to precisely control the curing time even when the lamp is placed under an armrest. Additionally, the lamp is equipped with a rear power switch, allowing full control over the device operation.

The fully mirrored interior coating reflects light evenly, eliminates “dead zones,” and ensures high-quality curing across the entire nail surface. Thanks to the built-in motion sensor, the device automatically turns on when a hand is placed inside, significantly increasing comfort and efficiency in salon work. The lamp features a spacious interior chamber, allowing comfortable work for men’s manicures, pedicures, and very long nails without the risk of them touching the sides or not fitting inside

LOOMI Heat Dissipation System

LOOMI features a next-generation passive cooling system that ensures stable 80 W performance — without a fan and without noise. How it works: Inside the lamp, specially designed heat-dissipation plates made of high thermal conductivity materials absorb heat from the LED diodes and efficiently spread it across the housing.
The heat is then naturally released through the ventilation openings, preventing local overheating.


Lamp Modes and Their Usage

Turn on the lamp by pressing the power button; turn it off the same way. Infrared motion sensor: the lamp turns on for 00–90 seconds after inserting your hand and turns off when you remove it. After pressing the 10S, 30S, 60S or 90S buttons, a countdown will appear on the display.

4 Curing Modes

10 sec – fast curing (flash curing)
30 sec – standard curing for gel polish
60 sec – for thicker or highly pigmented products
90 sec (Low Heat Mode) – gradual increase of power for greater comfort during curing
(35% brightness from 0–30 s, 60% from 30–60 s, 100% from 60–90 s)

4 Power Modes

80 W is the maximum power of the lamp, but it can be reduced.
If you press and hold the “90 sec” button for 3 seconds, the power adjustment mode will be activated. Use the “30 sec” (–) button to decrease power
Use the “60 sec” (+) button to increase power Press the “90 sec” button to confirm and exit the settings.

Sound

If you press and hold the “10 sec” button for 3 seconds, the sound signal of the lamp will be turned on or off.

Full Diodes / Half Diodes Mode (for clients who want to reduce UV exposure on the skin)

There is a sun icon on the display: if the sun is full — all diodes are on if only half of the sun is visible — half of the diodes are on
How to activate: Press and hold the “90 sec” button for 3 seconds, then press it again. Use the “30 sec” (–) button to switch to half diodes
Use the “60 sec” (+) button to return to all diodes Press the “90 sec” button to confirm and exit the settings.